 |
MAXIMUM MOTORSPORTS:MM Caster / Camber Plates:
The Maximum Motorsports
Caster/Camber Plates address the issues of obtaining proper alignment, both
static and dynamic, and achieving high performance handling.

MM's
Caster/Camber plates are unique:
- MM’s plates
are double adjustable. They have separate adjusting slots to change
caster and camber independent of one another.
- Our plates
double the range of motion available for camber adjustment compared
to stock.
- The range of
motion available for caster adjustment is not limited by the design
of the MM plate, but rather by the physical limitations of the strut
tower.
- The MM
plates use a spherical bearing instead of a urethane bushing. A
spherical bearing accommodates the required motion without binding.
Urethane binds and puts a bending load on the top of the strut
shaft, which may cause your strut top to break.
- The steel
construction and spherical bearing in MM’s plates provide a
non-deflecting strut mount. With the absence of deflection, you will
get better performance because of a quicker and more direct steering
response.
- MM’s plates
include progressive rate urethane bump stops which softens the
impact when the suspension bottoms out.
- Our plates
allow the use of the factory dust cover.
- Finished
with durable powdercoating for great looks
and long lasting protection.
- MM’s plates
provide the greatest increase in suspension travel possible for
lowered cars.
- All MM
Caster/Camber plates are TIG welded.
- All MM
Caster/Camber plates are suitable for use with coil-over conversion
kits.
Available in chrome finish add
$50. CC-1 replacement bump stops are available for $14.95.
| Application |
Part # |
Price |
Inquire/Buy |
| 1979-1989 Mustang |
MMCC7989 |
189.95 |
E-Mail |
| 1990-1993 Mustang |
MMCC9093 |
189.95 |
E-Mail |
| 1994-2004 Mustang |
MMCC9994 |
189.95 |
E-Mail |
| 1983-1988 T-Bird/MK VII |
MMCC8388 |
189.95 |
E-Mail |
|
 |